# Display configuration

***Copyright © Quectel Wireless Solutions Co., Ltd. 2026. All rights reserved.***

---

The Quectel Pi M2 smart main control board provides two display interfaces: HDMI and MIPI DSI. The appropriate display solution can be selected according to different application requirements.

Among them:

-  The HDMI interface supports external HDMI display devices, provides synchronized audio and video output, and supports hot plugging. 

-  The MIPI DSI interface is used to connect MIPI LCD displays. It is suitable for fixed display scenarios such as embedded devices and industrial control applications, and does not support hot plugging. 

The locations of the display interfaces are shown in the figures below:

```{image} images/image_DY7kbhFkjorpgBxyFhccdoH5nVb.webp
:width: 1280px
:height: 872px
:align: center
```

```{image} images/image_Ej3Lb8Ytwo3sp8xgu7ncQaSznQh.webp
:width: 1150px
:height: 731px
:align: center
```

# MIPI Display Configuration

The Quectel Pi M2 supports connecting a MIPI LCD display through the onboard MIPI DSI interface.

The connection method is shown below:

```{image} images/image_XObHbm3U1oZYRWxhvg0ckjxxnDf.webp
:width: 1252px
:height: 730px
:align: center
```

## System Settings - Display Settings

First, click the status bar in the upper-right corner of the GNOME desktop, and then click “Settings”:

```{image} images/image_Qf8vbGtN3ocaeexT8mbcvDgdnbh.webp
:width: 1280px
:height: 800px
:align: center
```

Click the “Displays” tab and modify the following settings:

```{image} images/image_HsNrbQM8JonoxuxDag0cgus4n5f.webp
:width: 1280px
:height: 800px
:align: center
```

# HDMI Display Configuration

The Quectel Pi M2 provides a standard HDMI display interface and can be connected to an external display using an HDMI cable.

The connection method is shown below:

```{image} images/image_WdRibQve0o3bIfxuPyMccJPvne4.webp
:width: 1448px
:height: 1086px
:align: center
```